resistor for airbag delete
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
resistor for airbag delete
I removed both of my airbags on my 2000 RCSB and I figured if I leave the module hooked up, and put a resistor in line where the airbags were, I should be able to eliminate a light, right? If so, does anyone know the correct ohms, or possibly another way to avoid a light.
#3
TECH Addict
test the airbag using a NON-CURRENT-INDUCING ohm-meter (an analog meter is usually safe....avoid a digital meter as it may make the airbag detonate ) to see what the airbag's actual resistance is, then go buy a resistor of the value (+/- 10% is OK)
Trending Topics
#10
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
well I could do that, but I would rather come up with an extremely complicated solution involving numerous devices that could both injure me and or destroy my truck. Only then will I be fully satisfied in knowing the problem is fixed.
Or you could just pull the bulb for me ***...
Or you could just pull the bulb for me ***...