IM LOWR

It's a custom built vinyl covered box for three 12's with an amp rack on top(against the wall under the rear window). It used to house 2 PPI amps and 3 JL Audio 12's but I no longer have that stuff and my truck has been body dropped so it will no longer fit in my cab. The bottom of the box has been made of fiberglass to follow the form of the hump in the middle of the floor and out to the sides of the cab. The only disadvantage is the seat(s) will lose 1 inch from the 'all the way back' position. The amp rack can be removed if not needed but the vinyl cover will need to be re-done. First $100.00 takes it.

MacADaYear

Im interested.
Email me at camaroz@excite.com.
If you have any pics send em.

red53gmc

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by IM LOWR:
<strong>my truck has been body dropped so it will no longer fit in my cab.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">HUH? Did your cab shrink with the body drop?

IM LOWR

The body drop lowers the body over the frame so the rocker panels below the doors become flush with the lowest part of the frame which touches the ground(when i let the air out of the bags the rockers are on the ground and you can not see my frame showing below the cab). In the process the floor of the cab and floor of the bed are raised-in my case 2.5inches, unless of course you get a 'stock floor' body drop where the floors are not changed but the from from the firewall back is completely re-constructed(about doubling the cost and time of the body drop). The box was originally built for my 00 which was not body dropped. I hope this makes since.

IM LOWR

Ooops! what i meant was in a 'stock floor' body drop the floors are not changed, and the frame of the truck from the firewall to the rollpan is completely re-constructed, etc.