Is there anyway to get rid of the damn "no seatbelt" chime?
#1
Launching!
Thread Starter
Join Date: Nov 2002
Location: S'port
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyway to get rid of the damn "no seatbelt" chime?
God, what an irritation. Can this be elminated with tuning? Its really annoying when it breaks out with the "buckle passenger seatbelt chime"
Any way I can get rid of this **** Oppression?
Any way I can get rid of this **** Oppression?
#3
Destroyer of Transmissions
iTrader: (28)
I buckle my seat belt before I put the truck in gear. So I son't really know what you're talking about.
I don't think it can be tuned out. You would probably have to pull a fuse but, that may be tied into other systems. If you really can't deal with it, buy another buckle (no strap) and stick it in the slot so you don't tear up the stock belt
I don't think it can be tuned out. You would probably have to pull a fuse but, that may be tied into other systems. If you really can't deal with it, buy another buckle (no strap) and stick it in the slot so you don't tear up the stock belt
#6
TECH Fanatic
Join Date: Jun 2006
Location: GO PACKERS!!
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
no you cant tune it out... all it is, is your buckle acts like a switch once its in it make a compleate circuit and shuts off the light in your dash and the chime all you have to do is take off the seatbelt cover and splice the 2 wires together
Trending Topics
#8
Yeah just splice the wires or use a resistor. Shouldn't be hard to figure out. I'm lucky. I have a 2000, and apparently the connectors are worn because the seatbelt light stays on even when I put it on but my particular year doesn't chime, apparently.