Tow haul doesnt work
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Location: VT
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Tow haul doesnt work
Hey guys I have a new to me 01 Silverado 2500 2wd. Tow haul hasnt work since I bought the truck so I researched on here and found that the wires breaking is a common issue. So I checked and guess what mine were broken. So I ordered a shifter off eBay and the listing specifically said tow/haul works on the shifter. So I installed the new shifter and nothing. Still doesnt work. Is there a fuse that could be blown? I hope its not an issue with my PCM or something stupid like that.
Thanks for the help
Thanks for the help
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Location: VT
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure the wires are fine. But I can check the resistance in the wires.
Had a little side thought there. If I were to momentarily cross the wires at the plug that should turn on tow/haul, right? If it does then the issue is in the wiring or switch. If not then the issue is somewhere else. Would this work?
Had a little side thought there. If I were to momentarily cross the wires at the plug that should turn on tow/haul, right? If it does then the issue is in the wiring or switch. If not then the issue is somewhere else. Would this work?
Last edited by Landcruisin60; 10-18-2010 at 09:56 AM.
Trending Topics
#9
Teching In
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Location: VT
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Ok that makes sense. From reading the owners manual I thought that the little information center light screen thing on the left is where it says tow haul. But after some internet research I see there is actually a light on the upper right of the cluster that says tow/haul. I'll check that bulb.