unload engine ideas?
#21
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1SlowHoe
P.S. Nobody likes Cody.
I've always used the belhousing bolt holes for the engine stand. Who the hell would put it in the heads anyway? That would make it even closer to the ground and have to bend over further.
#22
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Orlando
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
got the engine unloaded with the hoist and it is safely on the ground on top of the pallet. I used the bolt holes in the heads that are used for the accessories on the front and back side. I think bolts I needes was a 10mm with a 1.5 thread pattern and I got the one that was 30 long. The thread with pics is located at https://www.performancetrucks.net/fo...d.php?t=360797
#24
TECH Addict
iTrader: (2)
Join Date: Feb 2004
Location: Tampa, Fl
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OrlandoFL4.8
got the engine unloaded with the hoist and it is safely on the ground on top of the pallet. I used the bolt holes in the heads that are used for the accessories on the front and back side. I think bolts I needes was a 10mm with a 1.5 thread pattern and I got the one that was 30 long. The thread with pics is located at https://www.performancetrucks.net/fo...d.php?t=360797
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 10:54 AM
lsxperformance
Tuning, Diagnostics, Electronics, and Wiring
1
08-02-2015 10:08 AM
Nimoryan
GMT 800 & Older GM General Discussion
0
07-05-2015 03:50 PM