what harmonic balancer puller is everyone using?
#26
I got a generic 3 jaw puller from a local auto parts store. It was pre-assembled and just hanging on the wall behind the counter. I think it was 30 or 40 bucks. Similar to the one in the pic but each arm has another pivot point in the middle.
I got a longer bolt from Fastenal to start the pulley back on.
The amount of torque on the threads to press the pulley on with the longer bolt is nowhere near the amount used when final-torquing it down. I would never hammer it on partially and/or try to use a stock bolt to press it on the rest of the way. That's asking for a disaster.
I got a longer bolt from Fastenal to start the pulley back on.
The amount of torque on the threads to press the pulley on with the longer bolt is nowhere near the amount used when final-torquing it down. I would never hammer it on partially and/or try to use a stock bolt to press it on the rest of the way. That's asking for a disaster.
Thread
Thread Starter
Forum
Replies
Last Post
SlvrSierra4.8
GM Parts Classifieds
7
10-01-2015 09:39 PM
Tigger Welder
INTERNAL ENGINE MODIFICATIONS
14
10-01-2015 08:41 AM