GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

Wiper switch only works on high

Thread Tools
 
Search this Thread
 
Old 07-12-2009 | 10:49 PM
  #1  
phasemaster1's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2005
Posts: 1,416
Likes: 0
From: florida
Default Wiper switch only works on high

Never had any issues one day to the other the wipers dont work except on high even the washer dosent work. Could it be the wiper modual? Where is it located and if anyone has a part number thanks.
Old 07-12-2009 | 11:08 PM
  #2  
05GMCL33's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: May 2005
Posts: 315
Likes: 0
From: Wichita
Default

Sounds like the switch is bad to me .
Old 07-12-2009 | 11:41 PM
  #3  
CHEVRACER83's Avatar
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default

bad switch or control board.... control board is much cheaper and much easier to change

gm pn 12463090 for most units.... but you can confirm with your local dealer.

damn i havent worked there in almost a year and still remember that lol
Old 07-13-2009 | 10:03 PM
  #4  
phasemaster1's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2005
Posts: 1,416
Likes: 0
From: florida
Default

Originally Posted by CHEVRACER83
bad switch or control board.... control board is much cheaper and much easier to change

gm pn 12463090 for most units.... but you can confirm with your local dealer.

damn i havent worked there in almost a year and still remember that lol
Will look it up thanks. Is the control board under the plastic under the wipers?
Old 07-14-2009 | 01:23 AM
  #5  
AKlowriderZ71's Avatar
11 Second Hall Moniter
iTrader: (22)
 
Joined: May 2008
Posts: 11,651
Likes: 8
From: Wyoming
Default

Wiper delay module. Yep, that's it.
Old 07-14-2009 | 02:08 AM
  #6  
CHEVRACER83's Avatar
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default

its actually under the small plastic cover on the wiper motor
Old 07-14-2009 | 06:08 AM
  #7  
phasemaster1's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2005
Posts: 1,416
Likes: 0
From: florida
Default

Thanks again Chevracer83
Old 10-11-2009 | 09:17 PM
  #8  
phasemaster1's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2005
Posts: 1,416
Likes: 0
From: florida
Default

Just got around with replacing the "Cover kit" and wipers work like new thanks again. Oh remember to mark the wipers on windshield before removing them I used blue painters tape under them and used a marker.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 11:54 AM
fastjweb
Drag Racing
20
08-15-2015 11:47 AM
dantheman1540
Foreign Performance Discussion
1
07-29-2015 05:45 PM
atxlt
Tuning, Diagnostics, Electronics, and Wiring
1
07-21-2015 12:06 AM




All times are GMT -5. The time now is 03:09 AM.