Wtf?!?!?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: Atlanta,Georgia
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Wtf?!?!?
Okay so Im on the interstate coming to Atlanta for school. This guy pulls up in the same truck as mine, except a gm. Looks like he has no mods and is on stock rims with maybe a 285 tire, exhaust stock sounding also.
So of course after he ***** with me a bit we run them a few times down the interstate. Id say we started at about 75ish MPH and go till his truck stops which I guess is about 98 mph
Well I would take him from about 75ish to 90ish then he would start to pull ahead and catching me around 88-90ish until he couldnt go no more. We did about 5-6 runs and on most we started at almost exactly the same time.
How can he beat me like that?
No it was not heavy traffic, hate if you must!
I know I have a v7 right now, I need a new motor, trying to make this one last this semester. One of the cylinders is shot/burnt/ fucked in general and is doing nothing but going up and down right now without making power. But with my mods I figured I would have a least been able to beat him?
Mods:
Cal Speed Lt's
vette servo
BBP tune
CAI
Full exhaust
18" rock stars on 33 1250 mud grapps
3.73's
It was close every time, just I was a little disappointed that I couldnt beat a stock truck.( Im saying it was stock, not turbo whistle or supercharger whistle i could tell, and I could still see stock manifolds behind the splash guards)
Any Ideas?
So of course after he ***** with me a bit we run them a few times down the interstate. Id say we started at about 75ish MPH and go till his truck stops which I guess is about 98 mph
Well I would take him from about 75ish to 90ish then he would start to pull ahead and catching me around 88-90ish until he couldnt go no more. We did about 5-6 runs and on most we started at almost exactly the same time.
How can he beat me like that?
No it was not heavy traffic, hate if you must!
I know I have a v7 right now, I need a new motor, trying to make this one last this semester. One of the cylinders is shot/burnt/ fucked in general and is doing nothing but going up and down right now without making power. But with my mods I figured I would have a least been able to beat him?
Mods:
Cal Speed Lt's
vette servo
BBP tune
CAI
Full exhaust
18" rock stars on 33 1250 mud grapps
3.73's
It was close every time, just I was a little disappointed that I couldnt beat a stock truck.( Im saying it was stock, not turbo whistle or supercharger whistle i could tell, and I could still see stock manifolds behind the splash guards)
Any Ideas?
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: Atlanta,Georgia
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Yes I know them tires and rims kill me a lot, sucks but I like them so there staying ha.
Hope when the new motor goes in I will install a cam!!! I replaced first motor so this ones on pops and hes not to stoked about a cam, so I have some talking to do. Crossing my fingers lol.
Well I know he's gunna pull with me having a dead cylinder, I just figured with the few mods I have and from the stockish look and sound of the truck and after the first run, he seemed to be around my "race" legue if you will. So I figured with my mods I should still be able to beat him.
Guess that one cylinder can make a big difference.
Im still proud of her though, loosing or winning
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: Atlanta,Georgia
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
I want it to haul *** but right now Im not sure if its practical and frankly I wouldnt know what X cam with X stall.
Thanks for the cam suggestions. Sounds like what i need to be honest . Dad said when I graduate college in a few years he would but me a new truck. So If thats the case then this will be the weekend warrior one day lol.
If I get the green light to swap in a cam I will be sure to look you up.