RacinRust

Ok so I know this subject has been beat to death, but one more time, what type of cans are being run out there. I cleaned out my intake for the second time in 14k miles. See the picture. Pulled the tube off and shined a light in the hole. Nice puddle!

62nalide

iTrader: (1)

im running the moroso

drummer0415

iTrader: (16)

Mike Norris. I didn't have a really bad problem with oil in intake, i just had it sitting around and threw it on there. I know it's catching some though, cuz there is oil in there when i empty it periodically.

89LS1FOXER

iTrader: (47)

I'm running this with a LS6 valley cover, after a full race season only got a couple table spoons of oil out of each side, works great!

Stage 1 LS1 Type Dual OCC

RacinRust

Found this video on the Moroso web site.

Foxxer

Custom eBay one, worked well with the baffle filtering media I did to it, I'm running Moroso at the moment just for the looks.

scooter k

iTrader: (22)

There is a bulletin about oil in the intake that warranty will pay for if you are still under warranty or powertrain. They will clean your intake out and replace the driver's valve cover.

scooter k

iTrader: (22)

But I'd still run the catch can regardless!

Rmitch223

I'm definitely getting ready to put one on my 09 Sierra 5.3L. Can someone explain how they routed theres on this engine?
I know its simple, I just wanna make sure to get it right.

Rmitch223

anybody set one up on a 5.3L?