? on 6/9 or 7/10 on nnbs rcsb
09-14-2008, 04:46 PM
#1
Teching In
Thread Starter
Join Date: Aug 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
? on 6/9 or 7/10 on nnbs rcsb
Like the title says im wondering if the frame bottoms out a lot i know i have to notch the rear but what about the frame under the cab i dont want to be getting stuck everywhere.And how is the ride is it real rough,bouncy? and the last question what is the best way to do the drop control arms,spindles,springs what combo are you using any input would be great.
09-15-2008, 03:48 PM
#2
On The Tree
Join Date: Jul 2008
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
my truck is a 7/10 and rides awesome. I did notch the frame and used a spindle and upper and lower control arms in the front, w/ a flip, shackle and 1" block in the rear. I dont get stuck on things w/ the frame. The frame is about 4" off the ground under the cab, and my air dam is about an inch and 3/4 off the ground, that scrapes but who cares the truck looks sick.
,ide like to see some pics of your z06 7.0l
09-15-2008, 08:30 PM
#5
On The Tree
Join Date: Jul 2008
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
[IMG][IMG]
[/IMG][/IMG]nice, i have a z06 to, i just did 19'' and 20"'s last week, what yr is yours? Mine is an 06 w/ full exhaust, cam, vararam and i just did a 150 shot. You can see it on youtube, just look up "Tony's z06
[/IMG][/IMG]nice, i have a z06 to, i just did 19'' and 20"'s last week, what yr is yours? Mine is an 06 w/ full exhaust, cam, vararam and i just did a 150 shot. You can see it on youtube, just look up "Tony's z06
Last edited by 08slammedrcsb; 09-15-2008 at 08:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
