Alignment kit for 4/7 drop
#1
On The Tree
Thread Starter
Join Date: Jul 2009
Location: Not quite DETROIT
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Alignment kit for 4/7 drop
I am picking up a 4/7 drop this week and was wondering what you guys used for the alignment kit. I see Belltech offers a 1 or 2 deg kit. I am going with their spindle and adjustable strut up front.
thanks, Matt
thanks, Matt
#2
i used the following, just replaced the bushings, i just took the uca off then took them down to a local mechanic, he took them off and pressed the new ones to specs for $25,
http://www.spcalignment.com/PROD_DIR...d2=86350&cmd3=
or you can use
http://www.spcalignment.com/PROD_DIR...d2=86375&cmd3=
i know that belltech offers both bushing and camber kits, but their camber kit requires that you do some drilling dont know about the spc camber kit above
http://www.spcalignment.com/PROD_DIR...d2=86350&cmd3=
or you can use
http://www.spcalignment.com/PROD_DIR...d2=86375&cmd3=
i know that belltech offers both bushing and camber kits, but their camber kit requires that you do some drilling dont know about the spc camber kit above
#3
On The Tree
Thread Starter
Join Date: Jul 2009
Location: Not quite DETROIT
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I ended up going with the Belltech replacement bushings like the ones you posted. We have a press at my work so it should be pretty easy.
thanks
thanks
#7
u only need them when u have more a 2" spring or struts and the max drop on struts is 2 so just try it out first and if they dont align then just order the bushings i had to get the bushings cuz i had drop struts and springs