found a buyer by accident,turns out a mechanic buddy always liked my truck.I had plans of pulling all mods and selling the radix to maximize the value. He wanted it as is ,i didnt have to touch a thing and got the same money i was expecting if i did all the work and selling off parts,

Now what to do, if anything on this 2010 NHT CC, do I go SC or turbo or a good ol H&C PKG.Runs pretty decent stock but not responsive,

Anyone around done a front mount turbo a 6.2 truck?

 

NHT?

 

i say run a 76mm on that thing!!!! but that's just because i went N/A and Skipperdaddy went S/C'ed. i wanna see the 6.2 turboed

 

Do a Turbo and a good write up so I can use it lol

 

I think sts turbo has a set up for 5.3 and 6.2

 

Anyone hear of any 6.2 trucks with a turbo?

 

house of boost did a few FI setups. Trick did a few GMT-900s and Nelson Performance did a few GMT-900s

i would do a 72 or a 76mm depending where you want your truck at. id put a LS9 cam in it too since it's a boosted motor and im sure you can get them cheap. if not go with a Pat G boost cam

 

any links by chance???

 

Not very many trucks with the L92 and a turbo out there but there are a ton of LS3s in the camaros running turbos with no problems. Its the same deal as the previous motors. Id throw a TVS1900 on it and forget about it unless you live at high elevation then Id go turbo. Talk to kbracing96 he can hook you up.

 

i do live at 3500 elev. and yes Kyle is the go to guy.