Lowering options...
#1
Lowering options...
So i have a rcsb and im wanting to go lower...
I currently have. Rear block removed and 2" shackles... I want to go about 3 inches up front and about 2 more out back... To equal a 3/5... So heres my question what are my options without back tracking what ive done blah blah blah...
Im running stock 17's Since i just sold the 24's i had in earlier pictures...
I currently have. Rear block removed and 2" shackles... I want to go about 3 inches up front and about 2 more out back... To equal a 3/5... So heres my question what are my options without back tracking what ive done blah blah blah...
Im running stock 17's Since i just sold the 24's i had in earlier pictures...
#5
spindles and coil relocators (MCG)
or DJM control arms
DJM flip kit and MCG shackle relocator.
i pick the DJM flip kit because you can adjust your pinon angle with ease if you know what you are doing. i know thats a battle with people that say MCG has the degree already set but that's not truck in all trucks. mine caught hell with trying to set the pinon angle because you cant put shims and still have enough stud to catch the flip kit to make sure your rear end is perfectly straight with the truck still.
once again, this is just my opinion from my experience
or DJM control arms
DJM flip kit and MCG shackle relocator.
i pick the DJM flip kit because you can adjust your pinon angle with ease if you know what you are doing. i know thats a battle with people that say MCG has the degree already set but that's not truck in all trucks. mine caught hell with trying to set the pinon angle because you cant put shims and still have enough stud to catch the flip kit to make sure your rear end is perfectly straight with the truck still.
once again, this is just my opinion from my experience
Thread
Thread Starter
Forum
Replies
Last Post