Needing pictures of your C-notch
#11
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: Athens, Texas
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Thats way down south. Way to far of a drive. But yea, that will be cool mike if you can get me some pictures because I've never heard of a "pipe style".
And after some searching, I can actually get the correct helper bag bracket that fit a notch and the notch itself for about 340, so thats not as bad as I thought.
And after some searching, I can actually get the correct helper bag bracket that fit a notch and the notch itself for about 340, so thats not as bad as I thought.
#13
Formerly darynC-10/23/10
iTrader: (19)
Join Date: Aug 2006
Location: gonzales louisiana
Posts: 2,300
Likes: 0
Received 0 Likes
on
0 Posts
if a shop notched it for you. im talking drop it off, and pick it up..... id say round 300-400 bucks ( shops have to make money) lol
do it yourself... $50.. thats if you already have a grinder and welding machine....
take that back... it would be 75.... i didnt add in a case of beer
do it yourself... $50.. thats if you already have a grinder and welding machine....
take that back... it would be 75.... i didnt add in a case of beer
#14
TECH Apprentice
Join Date: Oct 2006
Location: lubbock, tx
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
**** mine was $100 me dropping it off at a shop to have it done... a pipe notch is EASY and with and experienced welder it can be knocked out in an hour easy
there's little to no cost in materials. just about 4" of the pipe, cut it in half, cut your frame, weld it up and your done
there's little to no cost in materials. just about 4" of the pipe, cut it in half, cut your frame, weld it up and your done
#17
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: Athens, Texas
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
hmm. That pipe notch does seem alot easier. I'll check into that.
I won't be doing this myself. I was just trying to gather info for my buddy that will be helping/doing it for me. Give him an idea of how much frame to cut, and all that bs.
Thanks guys.
I won't be doing this myself. I was just trying to gather info for my buddy that will be helping/doing it for me. Give him an idea of how much frame to cut, and all that bs.
Thanks guys.