red_silver

I am Installing a sub and amp in my nnbs rcsb and am wondering how you ran the power wire into the cab. Somewhere through the fire wall or under along the frame to the back of the cab? Any help is greatly appreciated!

viciousknid

iTrader: (8)

There's usually a place on the passenger side. Just take the kick panel off and look.

But PLEASE only start 1 thread on a subject. No reason to post in Stereo and in GMT900 both sections reach the same members.

MonteCarlo31

Fire wall on the drivers side by the steering shaft. looks like a gromet or something, pulled it out.

Rage_89

I had mine done at a local shop not too long ago. He connected the power wire to the fuse holder that is on the firewall close to the battery. Then he ran it into the cab (drivers side) alongside the main bundle.

Thats where I'm talking about when I say main bundle.

red_silver

I know some people don't always go into stero and some don't always go in GMT900. Just gunna do it tonight and wanted to know asap. sorry for the inconvinence!

Occupational_Hazard

iTrader: (2)

just drill a hole carefully and slowly. Mine on passenger side just right under the condenser.