SampsonSimpsonZ

I have a bad relay thats ran to my fogs at the moment. But I want to just hard wire it to something. The way they ran it, whoever did it before me, did a **** poor job with everything they've done to the truck. Bout got all the kinks out though ( knock on wood ). Is there a particular fuse I can hook on to? What have you all done? I got some H.I.D 6k to match headlights.

A Low Dime

iTrader: (13)

I have the trigger wire to the relay hooked to the parking lights. So if the headlights come on automatically, the foglights come on to. Or if I want to drive around with the fogs, my park lights will match with them when I turn the parks on.

AndysC3

iTrader: (14)

Mine are hard wired to the DRLs, And the drls come on with the lows. Also have it to where all the lights stay on with the Hi's. Plenty of light lol

SlickSierra

iTrader: (4)

In for this too. I just wired mine to the drl's but they got off when the headlights come on so i need to make it so they are on with the headlights also.

AndysC3

iTrader: (14)

I jumped the fog and lows at the fuse box. Basicly just like the 4hi mod.

TXSZ66AVLANCHE

iTrader: (7)

Bottom of fuse box D6? Then inside the truck the low beam wire jumps over to the fog light slot on the BCM. This way I can use the existing relay and fuse location in the underhood fuse box.