05 5.3 suggestions
#1
05 5.3 suggestions
new to site, was just curious as to what some of ya ll have had good results with. I already have an AEM bruteforce intake and JET pcm and im workin on a dual exhaust now, any suggestions are appreciated
#3
thanx, eventually i want to put a new throttle body, maf sensor, headers, and intake manifold on it. Some time down the road i was thinking a new cam and heads, of course a supercharger some day as well i want it to be bad
#4
TECH Fanatic
iTrader: (2)
Do yourself a favor and save up for the blower.
Buying the intake would be a waist after you get the blower.
A MAF sensor is a waist of time in your application.
Headers would be good in wait of a blower. You can then have the blower tune adjusted at the time of install.
The cam if you are for sure going to add a blower should be selected for the blower application. I'm not sure how a blower cam would be on a non-blown motor. Prolly good though.
Aim at a blower and save, beg borrow and steal. You will be glad you did.
Buying the intake would be a waist after you get the blower.
A MAF sensor is a waist of time in your application.
Headers would be good in wait of a blower. You can then have the blower tune adjusted at the time of install.
The cam if you are for sure going to add a blower should be selected for the blower application. I'm not sure how a blower cam would be on a non-blown motor. Prolly good though.
Aim at a blower and save, beg borrow and steal. You will be glad you did.
#9
well i want serious performance but i dont want to give up drivability and i intend to keep this truck as a project truck i want it to be purely street no strip and because its a long term project turck that gives me time to save up for the parts and put them all in