OK guys my uncle has a 03 HD 6.0L and wants to add a small cam but he tows all the time and doiesnt want a stall. i told him a 2600 yank wouldnt hurt his towing but he is skeptical. so whats the biggest cam we can go without a stall. thanks everybody

 

around 214-216 degrees duration on a 6.0 I would say... once you really start to go any bigger, the bottom end tq fall out from underneath you.... he could go with a 220 cam easily with that converter and still retain plenty of towing capacity... just be sure his cooler is up to the task.

 

ok, im going to be putting a 216 220 cam in my truck. so anything a there or a little smaller. thanks man. larry

 

the 212.218 comp high lift cam IMO would be excellent.

 

ok thanks. ill look into to that one.

 

definitely a torquey cam in a 6.0 I'd say.

 

yah that is what I would think and it should have descent top end.

 

ok guys, ill tell my uncle and we will start looking for one when hes ready. thanks a million. larry

 

How much difference would a yank 2600 make in a 4L80E. Here's a vid with a stock stall in an HD.

 

a 2600 converter will wake it up alot... but since towing is still a factor, I wouldnt really go any higher.