nighthawk08

how long have you been running them with that cam?

southern_chevy

iTrader: (9)

About 8 months and 15k miles.

1989k1500

iTrader: (23)

That sucks. Hopefully it didnt hurt anything.

5 studs for the coils and 4 bolts for the valve cover. Not a big deal.

Yea they can break too but it should at least keep the valve up that way. Would suck to dump the valve.

fastrt

iTrader: (48)

get some prc springs from tsp

southern_chevy

iTrader: (9)

I got some patriots from thunder since they are local and stock them.

chevysten

iTrader: (5)

I have the Comp.26918 springs and I have a tapping noise every so often.I'm going to swap springs and see if the tapping moves to the other side.I have a Comp. Cam 222/228-581/588 112+2.new ls7 lifters.Comp.harden push rods and Harlan Sharp rockers.I think I have a weak valve spring.Has anybody else had any problems with these springs?

Mike

supersub

iTrader: (25)

Patriot extreme's here!

black4.8

iTrader: (1)

patriot extremes are the only way to go!!

southern_chevy

iTrader: (9)

Pick up the patriot golds, gaskets, and arp bolt tomorrow. Then start the tear town to see what all it messed up.

silver-mod-o

iTrader: (15)

I've got Crane duals and Crane roller rockers in my motor, Ti retainers as well. Crane makes quality parts.....