Engine mods
#21
Thanks! Back when I was young and stupid everyone was telling me to de-screen the MAF so I did and my truck ran like crap. I researched the ins and outs of how the MAF works and there outlined above is my Freshman year research paper, the topic was up to us. I shortened it QUITE a bit to fit it on here but basically I left the important points in.
#22
Registered User
Thread Starter
Join Date: Apr 2008
Location: Maryland
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
This is a cam that came from comp cams as a kit with springs. cam part# 54-452-11 gross vale lift intake.520 exhaust.524 lobe lift intake212 exhaust216
#23
Registered User
Thread Starter
Join Date: Apr 2008
Location: Maryland
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I Took Out The Rocker 1.85 Trying To Get To The Root Of Some Of My Problems. I Was Hopping The Truck Would Run A Little Better ,not Happin. I Put The Stock Rocker Back In The Truck Runs Ok But There Is A Hesitation Around 50-65 The Idle Is Fine And When I Floor It She Doesnt Skip A Beet. I Think The Truck Need To Have The Computer Flashed Stock And Start Fresh.
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 10:54 AM