fresh 4.3l won't start
#31
13 Second Truck Club
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
we'll i never thought about making a driving vid lol. but yeah, she is all up and running. it does not like the maf at all. soon as you turn it on it has a real bad throttle lag. still needs some cold idle tuning. just too lazy to do it right now lol. been working stupid long hours. good ole navy.
#33
13 Second Truck Club
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
I need some additional tuning in that area, every now and then I can feel the bog under light throttle down low, like taking off from a light. I need to get a log of that though.
#36
eagle h-beam rods, forged pistons, arp on mains and heads, felpro mls gaskets, comp behive springs on the heads. comp cams 224/224, heads were port and polished with valve job by a local guy. marine intake with seimen 60's.
in my closet i have a mpt-70 and a set of syty manifolds along with a detroit locker for the rear.
he still needs to order the meth. the goal is 500rwhp. which is why i want to do the 3bar. i think he will need it for the 15-20psi this little 8.8:1 compression motor will be getting.
in my closet i have a mpt-70 and a set of syty manifolds along with a detroit locker for the rear.
he still needs to order the meth. the goal is 500rwhp. which is why i want to do the 3bar. i think he will need it for the 15-20psi this little 8.8:1 compression motor will be getting.
Thread
Thread Starter
Forum
Replies
Last Post
Mossyoakglock
GMT 900 Trucks General Discussion
4
08-28-2015 12:49 PM
Fast86z
GM Engine & Exhaust Performance
4
08-23-2015 12:35 AM
InsaneDomestics
Tuning, Diagnostics, Electronics, and Wiring
5
07-27-2015 02:42 PM
Mossyoakglock
GMT 900 Trucks General Discussion
0
07-17-2015 08:30 AM