Team Paulie

iTrader: (1)

to swap out cams in a 2004 Truck with a 4.8?

I'm just looking for others that have done it, and what I should look out for and be ready to tackle.

01SilvyZ71

iTrader: (1)

cant help you but subscribed for answers as well.

cwalker2006

iTrader: (11)

its not hard, follow the ls1howto...and get a good spring tool, so much faster.

06tx4.8

iTrader: (18)

i used the lingenfelter spring tool, and i bought the cam tool as well, its easy, i had never done one, swapping cam and springs for the first time ever took exactlty 12 hours from the first bolt bein loosened to start up!! do like cwalker said, follow the ls1howto.com. cant go wrong

dirt track racer 81

iTrader: (45)

on how hard it is to do is just one mans opinion. some one that is not mechanically inclined, its harder than **** and will take a week to do, some one that knows what they are doin, its just a few hours.. read up on ls1howto.com

Team Paulie

iTrader: (1)

anybody wanna come on over and help me?
I got a fridge full of beer and some collage girls living next door....

00ChevyScott

iTrader: (10)

Didn't go to college did you?

Team Paulie

iTrader: (1)

yup I went to University of Tennessee, class of 2006

Love the volunteer's.

Bluchevypick

iTrader: (65)

Where are you located? I can do a cam swap in about 4 hours.

budhayes3

iTrader: (19)

Without the right tool, the springs are harder to do than the cam...the Crane valve spring tool makes the job a piece of cake (if it's still available)