JONES2004z

has anybody heard anything about this cam HPE mega death 244/242 112 Lsa cant remeber the lift exactly wana say .620 on intake and .612 on the exhaust intake may be a little less not sure......... setup is 2004 ecsb z71 lq9..... tr 228/232 112 lsa at .602 on both custom grind...comp spring/pushrods.... 3200 stall.... stage 3 perforabuilt trans.. ...shorties full 3inch exhuast through two flows runs good for a heavy truck but want some more LOPE out of the cam yes it is a DD but i jus like a hard hittin cam


p.s. for anybody who hasn't heard a aound clip of this cam you deffantly need to

skyhighsami

iTrader: (8)

I think that cam would be too big and wouldn't really be a good match for a 6.0 liter motor in such a heavy truck. I think you would give up way too much bottom end. Just my .02

Wilde Racing

iTrader: (26)

Specs sound like the polluter cam. .24x/.24x (.61x/.61x) on a 110 or 112LSA
here is a thread (with sound clip)
https://ls1tech.com/forums/showthread.php?t=997489
That car idles at 1000 rpm....
A bit big for a daily driver....

ap2002

iTrader: (8)

the megadeath is too big for your application, i would do the 228/232 instead maybe even on a 110LSA, but an ideal size for you application would be like a 224/224

BlownChevy

iTrader: (20)

MEGA DEATH!

JONES2004z

at wide open throttle my truck never gets below 3800 rpm ..... so i think i have no bottom end already so mybe wouldn"t hurt to lose some haha......... maybe my daily drivabilty is a little more hard core than others i like a big cam PERIOD something about the sound is just awsome and i know im not the only person on here that likes the sound of a cam.... as far as the dialy drive'n part i drive five miles to and from work live in a small town so not a lot of stop and go stuff

dirt track racer 81

iTrader: (45)

check the cam in my sig and i gotta vid of it too..its in a 370 with milled 243 heads. im not 4wd though.. a big cam like that needs higher compression also..

JONES2004z

yea man sounds good..... i dont know im jus used to old chevy motors hittin hard last truck was a 94 toyota with chevy 350 292 cam and some good heads guess im just used to a truck shaker cam..... the one i have in my z is prolly pleanty if not to much but jus liked the sound of tha clip on youtube of the HPE

JONES2004z

http://viewmorepics.myspace.com/inde...mageID=6043154

picture of my truck if ya'll wanna see

dirt track racer 81

iTrader: (45)

i know what your talkin about i gotta 13.1:1 355 with a 292/300 adv dur cam in my dirt track car.. gotta love a 1200 rpm idle with a chop