staffcurtis

iTrader: (-1)

I'm building my SUV up with a 408 and STS T76. I'm striving for 600rwhp, but I know how I am, and want the engine capable of 1000hp. I've got the the bottom internals pretty much figured out, but which injectors should I use? I plan on using the stock LQ9 intake, and heads unless someone thinks otherwise.

Thanks

PS...2003 AWD Escalade

thunder550

iTrader: (70)

Get in touch with Acceleronics. Jeff is a very knowledgeable guy. You'll have to run low impedance injectors for 1000 hp with a converter box, but it's not really a huge deal to install. The 96#'ers that I bought should be good up to 1300 hp or so. 83#'ers were the same price.

staffcurtis

iTrader: (-1)

what is Jeff's screen name? I will contact him shortly.

Thanks

thunder550

iTrader: (70)

I don't think he's on the site. Try acceleronics.com

TurboBerserker

iTrader: (1)

What Thunder said... I run 95's and a versafueler from acceleronics.

staffcurtis

iTrader: (-1)

Got it....err gettin' it!

2004SSS

iTrader: (25)

id be scared to run the sotck lq9 intake on that big of a horse power motor. id look into something that doesent give 7 and 8 more air.

staffcurtis

iTrader: (-1)

I'm open to ideas. Anything that would resemble stock would be nice.

TurboBerserker

iTrader: (1)

Lots of guys are doing Vic Jrs these days. Others to look at: FAST, LS6.

staffcurtis

iTrader: (-1)

I think I'll just use the stock intake. Couldn't I just tune it through those cylinders at WOT to verify they won't run lean? If the rest are a little rich, then there shouldn't be a problem.

Correct me if I'm wrong here