Need some advice with the cam in my LQ4
#1
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Apr 2010
Location: jennings,louisiana
Posts: 1,750
Likes: 0
Received 0 Likes
on
0 Posts
Need some advice with the cam in my LQ4
This is how I ended up with this cam! A friend called a friend & the that friend call someone else & then he calls back with the cam I needed for my LQ4!
So here's the question! What's yalls opinion on this cam? Can I get Alot more power with it?
I've read a lot of forms on cams but haven't found anything r anyone running this type of cam!
Cam spec
intake & exhaust
Lobe seperation=114.1
Valve overlap= -4.2
Intake
Valve open= .5 'btdc
Centerline. 110 'atdc
Duration. 221.4 crank deg
lobe lift. .33311
valve lift. .56629
lobe area = 25.51
exhaust
Valve open = 51.4 'bbdc
Center line. 118 'btdc
Valve close. -4.7
Duration. 226.6
Lobe lift .33087
Valve lift .56247
really would like everybodies opinion don't wanna be pissing in the wind!
lobe area 26.01
So here's the question! What's yalls opinion on this cam? Can I get Alot more power with it?
I've read a lot of forms on cams but haven't found anything r anyone running this type of cam!
Cam spec
intake & exhaust
Lobe seperation=114.1
Valve overlap= -4.2
Intake
Valve open= .5 'btdc
Centerline. 110 'atdc
Duration. 221.4 crank deg
lobe lift. .33311
valve lift. .56629
lobe area = 25.51
exhaust
Valve open = 51.4 'bbdc
Center line. 118 'btdc
Valve close. -4.7
Duration. 226.6
Lobe lift .33087
Valve lift .56247
really would like everybodies opinion don't wanna be pissing in the wind!
lobe area 26.01