INTERNAL ENGINE MODIFICATIONS Valvetrain |Heads | Strokers | Design | Assembly

New**looking for advise tahoe 4.8 motor needs more power**

Thread Tools
 
Search this Thread
 
Old 03-21-2009, 10:23 AM
  #1  
Registered User
Thread Starter
 
danny_c's Avatar
 
Join Date: Mar 2009
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default New**looking for advise tahoe 4.8 motor needs more power**

I have an 04 tahoe with a whimp 4.8 motor. Looking for info on what or if any LS1,2,4 etc. parts can interchange over without to much of a hassle. My original plan was a supercharger kit but the horsepower gain per dollar ratio is not good. The only difference in from my 4.8 to a 5.3 looks to be the stroke hp figures are almost identical. The swapping in a 5.3 would be hopleess IMO. My buddy is selling me LS2 heads, manifold with tb fuel rail and injectors. Would this be useful to me? HELP lol
Old 03-21-2009, 08:36 PM
  #2  
TECH Apprentice
iTrader: (1)
 
jophuss36's Avatar
 
Join Date: Feb 2009
Location: nw Indiana
Posts: 356
Likes: 0
Received 0 Likes on 0 Posts
Default

I believe that your truck intake actually produces more power than ls2, read that on a test on web, I don't think types heads would help you much either, I'd say your best bet is a cheatr cam from thunder racing you don't need headers or a stall and the cam plus springs and rods can be had for around 600 I have ls2 cheatr cam in 6.0 and pushing around 340 horse to wheels in a lifted 4x4 I was happy with improvement. You
Old 03-21-2009, 09:25 PM
  #3  
Registered User
Thread Starter
 
danny_c's Avatar
 
Join Date: Mar 2009
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

you have a 6.0 i have a 4.8....i don't think i will see the same benefits from a cam...I wish i made more power than an LS2. My truck is rated at 295 BHP, minus drive train loss i would say 245 on a chasis dyno. My buddy works at a junkyard and i pretty much can get any LS type stuff cheap. I will look into a thunder cam. Would i benefit from port work? I'm actually looking to get close to 400 whp on pump gas i don't know if its possible.
Old 03-21-2009, 10:36 PM
  #4  
Teching In
 
highroller02's Avatar
 
Join Date: Sep 2008
Location: Hesperia,CA
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont think those parts would really benefit you but you mught wanna try a tune,cai,headers and gears,then if you want more which most likely you will you could do a stall and cam.
Old 03-21-2009, 11:10 PM
  #5  
TECH Apprentice
iTrader: (1)
 
jophuss36's Avatar
 
Join Date: Feb 2009
Location: nw Indiana
Posts: 356
Likes: 0
Received 0 Likes on 0 Posts
Default

400 is possible, I know Vengance did a 4.8 with trickflow heads not sure what cam on a 2wd reg cab and is in the upper 12 second quarter. If your willing to spend a bit of money I'd do a stall (if you don't tow). Maybe 3600 cheap set of long tubes and a set of good heads I'd stay in the 205 intake runner size
Old 03-21-2009, 11:13 PM
  #6  
TECH Apprentice
iTrader: (1)
 
jophuss36's Avatar
 
Join Date: Feb 2009
Location: nw Indiana
Posts: 356
Likes: 0
Received 0 Likes on 0 Posts
Default

Highroller, just curious what does your setup do in the quarter?
Old 03-21-2009, 11:22 PM
  #7  
Teching In
 
highroller02's Avatar
 
Join Date: Sep 2008
Location: Hesperia,CA
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont know what it runs, never been but with the nitrous I would think high 13's
Old 03-21-2009, 11:42 PM
  #8  
TECH Apprentice
iTrader: (1)
 
jophuss36's Avatar
 
Join Date: Feb 2009
Location: nw Indiana
Posts: 356
Likes: 0
Received 0 Likes on 0 Posts
Default

I bet it's faster than you think, my pops has the 5.3 how is that 220 cam
Old 03-21-2009, 11:52 PM
  #9  
Teching In
 
highroller02's Avatar
 
Join Date: Sep 2008
Location: Hesperia,CA
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

I like it but I have been wanting to change it just to try something different or maybe just get a bigger stall Im always changing my mind lol.looks like your truck runs pretty good too.
Old 03-21-2009, 11:58 PM
  #10  
TECH Apprentice
iTrader: (1)
 
jophuss36's Avatar
 
Join Date: Feb 2009
Location: nw Indiana
Posts: 356
Likes: 0
Received 0 Likes on 0 Posts
Default

it's ok you always want something More LOL


Quick Reply: New**looking for advise tahoe 4.8 motor needs more power**



All times are GMT -5. The time now is 11:28 AM.