Patriot cam?
01-12-2010 | 09:30 AM
#1
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Patriot cam?
I'm still trying to find out what cam to run... I noticed that the Patriot cam is 100 bucks less expensive than almost any of the other cams i've been looking at. Is anyone running this cam? Any dyno numbers?
Last edited by LS1FREEK; 01-12-2010 at 09:43 AM.
01-12-2010 | 02:13 PM
#3
Baltimore Whore
iTrader: (95)
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
I would look into another brand. I have never had 1st hand exp with any of there products, but from the things I have heard about the heads they sell, I would op to spend more... Again some people might have had great results, but I have heard of alot of probs
01-12-2010 | 06:26 PM
#4
a few people have ran their 226/226 cam and have had very good results.... there was a thread about this a few years back.... i believe comp cam grinds their cams so its the same....
01-12-2010 | 06:28 PM
#5
It's a standard comp XER cam as far as I know
Although you never know if it's legit or not. It could be a regrind. Just like those aftermarket casting 243 LS6 heads they sold for $450.
Although you never know if it's legit or not. It could be a regrind. Just like those aftermarket casting 243 LS6 heads they sold for $450.
Trending Topics
01-13-2010 | 07:53 AM
#10
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Hey thanks for the input guys! I was thinkin of running the 225 229 cam.. But i just found me a cam over at ls1tech.. 224/232 .581/.595 w/114 Lsa ground on comp XE-R lobes. I bought it with some patriot dual gold springs. I think it ought to run pretty good