Pics! Heads/Cam Swap
#1
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Anderson, TX
Posts: 2,775
Likes: 0
Received 0 Likes
on
0 Posts
Pics! Heads/Cam Swap
I know everyone and their dog have posted similar pics, but here it is anyway.
Mods include:
TSP 228/228 .588/.588 112
TSP Stg 2.5 heads with PRC dual valve springs
TSP 7.400 Pushrods
LS7 Lifters
LS2 Timing Chain
ARP rod bolts
*NEW* o-ring for my stock oil pump instead of the Ported LS6 I have
Just pulled the heads off
Cleaned up a bit
Me and Rilee (my daughter) working on the truck.
ARP rod bolts
Beau with the 228R cam
New heads on after Jon (Spazdout) breaks a socket. Heads are stg 2.5 5.3 from Texas Speed with dual valve springs
Close up
Mods include:
TSP 228/228 .588/.588 112
TSP Stg 2.5 heads with PRC dual valve springs
TSP 7.400 Pushrods
LS7 Lifters
LS2 Timing Chain
ARP rod bolts
*NEW* o-ring for my stock oil pump instead of the Ported LS6 I have
Just pulled the heads off
Cleaned up a bit
Me and Rilee (my daughter) working on the truck.
ARP rod bolts
Beau with the 228R cam
New heads on after Jon (Spazdout) breaks a socket. Heads are stg 2.5 5.3 from Texas Speed with dual valve springs
Close up
#3
how do you like that cam, I am ordering LS-6 heads from Patriot milled back down to a 61 chamber tomorrow and lookin for a good cam to install while i am in there. Its a 99 Z71 5.3 ordering new heads because they have header bolts stuck in after installing pacesetter headers. Also with the head swap I will be running 918 springs in as well.
#4
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Anderson, TX
Posts: 2,775
Likes: 0
Received 0 Likes
on
0 Posts
Right now it barely idles, and has no power because I need a tune. So I am not really able to comment on the cam too much. I know it has a nice choppy idle, that's about it.