Rocker suggestions
#1
TECH Fanatic
Thread Starter
iTrader: (24)
Join Date: Dec 2004
Location: Houston, TX
Posts: 1,825
Likes: 0
Received 0 Likes
on
0 Posts
Rocker suggestions
I'm starting to look around for some rockers to go along with the new cam eventually. I messed up one of the rocker bolts putting the stock cam back in a few months back so I figured that if I'm going to do springs again with the new cam I might as well get better rockers.
I've heard a lot about the Harland Sharp roller rockers, but have never run them myself.
http://store.summitracing.com/partde...7&autoview=sku
New cam is going to be a custom Comp grind, probalby a 218/224 .570/.570 110LSA on XER lobes.
Thanks in advance,
Jake
I've heard a lot about the Harland Sharp roller rockers, but have never run them myself.
http://store.summitracing.com/partde...7&autoview=sku
New cam is going to be a custom Comp grind, probalby a 218/224 .570/.570 110LSA on XER lobes.
Thanks in advance,
Jake
#3
TECH Apprentice
iTrader: (2)
Join Date: Dec 2004
Location: Roch. NY.
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
I used the Comp pro magnum rockers and they did not fit under the stock rocker covers as advertised. I had to mill the casting dimples off from bottom of cover and remove the PCV baffle. Not a simple plug and play.
Trending Topics
#8