Dark Halo

iTrader: (14)

How high can I shift a 6.0 LQ9? The motor is stock bottom end with ARP rod bolts. With my cam and intake set up it feels like I could go past 7200 and still make power. My 1-2 shift just goes quick and I think I will make power above 7200 but how high can I go?

Dark Halo

iTrader: (14)

I am just wanting to try 7300 and maybe 7400

Atomic

iTrader: (42)

What cam do you have? Internal mods?

At that speed the engine might could take it but the trans wont be happy about it...

blackbeast ss

iTrader: (4)

^^^ im spining to 6400 with stock bottom end on mine.... have you been on a dyno to verify your powerband?

nonnieselman

iTrader: (10)

See what it runs at the track shifting at different RPMs... you will know what it likes then.

skeet

iTrader: (18)

i agree with nonnie, eric i changed my shift points saturday, cant tell ya if it helped or not i needed another run, but by the data log it did shift at 7k, plus i am still slipping off the line!! plus i am still having a slight voltage problem, and cant figure it out, might have to go with a 200 amp cause of the EWP

Dark Halo

iTrader: (14)

mine on the track seems to respond very will to the extra rpms I add. My cam is a 230 236 .591 .601 110 lsa. I will mess around with it a little more this saturday and see whats up.

silver-mod-o

iTrader: (15)

50 RPM before the rods try to find a way through the freezeplugs

-let us know

02_Orange_D1SC

iTrader: (30)

i dont think i would want to go much past 7000 id say 7200 max and thats with a set of ARP rod bolts

Dark Halo

iTrader: (14)

that is what I am at right now 7200 I may just keep it there.