Thoughts on This Cam
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: SOFLO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Thoughts on This Cam
I'm about to throw in a Comp Cam 238/242 .605/.610 114lsa. I have everything to go with it too. Just wondering if anyone had something similar and how they liked it, or if anyone had any other thoughts on this cam. Thanks.
#5
Launching!
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: SOFLO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
As of now, it'll be a 370. If I find the crank isn't perfect, I'll send back my pistons for a set that'll work with a 6.125 rod and a 4" stroke, and I'll have a 408. But yea, c/r is gonna be a lil over 11:1
Trending Topics
#9
not going for stealth are ya LOL, IMHO you will loose quite a bit of average power with that stick in a 370, if I were you and I wanted the nasty idle, yet still good torque for a dd able truck I would stay at or below low 230's like 230-233 .590 110lsa , I have a friend with a tfs 238-240 cam in his 02 ws6 m6 4.10's and it's very radical and even after tuning it isn't perfect, now a 408cid with 11-1 OH YEAH! JMO
#10
Launching!
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: SOFLO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Truck will be mainly a DD going from work and school, but I won't use it nearly as much as I do now. It'll be a 370 unless somethings wrong with the crank, then I'll go 408. C/R is gonna be a lil over 11:1 and I might add a bit of juice later on down the road, but I'm gonna stick with a n/a setup. I'd like to see 500hp but we'll see if that'll happen.