INTERNAL ENGINE MODIFICATIONS Valvetrain |Heads | Strokers | Design | Assembly

thoughts on torturing a 5.3?

Thread Tools
 
Search this Thread
 
Old 03-13-2010, 01:27 AM
  #1  
Registered User
Thread Starter
 
1sloC4's Avatar
 
Join Date: Feb 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default thoughts on torturing a 5.3?

The 5.3 is just a mule before the real motor goes in(max effort LQ). Basically I'm going to kill the 5.3 within 6 months. Before I do kill it, I want to see what can be pulled off without boost and cheap/free parts and some spray. Yes I would like to get a couple of months with it torturing the little guy.

Here's the build. Keep in mind this in a sub 3K# car with driver in street trim. Also Z06 parts were free.

2003 LM7
243 heads
02+ ls6 cam
7.425 rods
FAST 90 intake/ls6 rail/injectors
90mm TB
custom(for the vehicle) LT headers into dual 3 in.
EFI Live tune (not mail order)
progressive 150 shot

my guess without the shot is 340ish hp/475+/- with? Sound pretty close or am I waaaaay off here?

I'm thinking 10.99/low 11.xx in the 1/4 on the bottle. I'm keeping the long legs on this girly so please no gear swap stuff. Gear selection is VERY limited and I like having my top end.
Old 03-13-2010, 01:47 AM
  #2  
TECH Junkie
iTrader: (10)
 
00Silv4.8's Avatar
 
Join Date: Oct 2007
Location: Mesa AZ
Posts: 3,278
Likes: 0
Received 1 Like on 1 Post
Default

I think it may be tougher than you think?
Old 03-13-2010, 02:45 AM
  #3  
TECH Resident
iTrader: (7)
 
brent5631's Avatar
 
Join Date: Nov 2006
Location: Dallas
Posts: 862
Likes: 0
Received 1 Like on 1 Post
Default

Yeah if you don't screw up the tune it will most likely take a lot more than that.

When i read the title i was thinking something like like a 200 dry shot!
Old 03-13-2010, 03:13 AM
  #4  
TECH Addict
iTrader: (28)
 
skolman91's Avatar
 
Join Date: Feb 2009
Location: muncie IN
Posts: 2,018
Received 57 Likes on 35 Posts
Default

off/on topic, whats the biggest shot known someone's put on a stock 5.3 short block..? total..
Old 03-13-2010, 08:56 AM
  #5  
TECH Addict
iTrader: (7)
 
LS1TRUCKGUY's Avatar
 
Join Date: Nov 2005
Location: Deer Park Texas
Posts: 2,452
Likes: 0
Received 2 Likes on 2 Posts
Default

IMO, put some rod bolts in it and spray more.... like a 200 shot... you wont kill that 5.3 very fast with a 150 shot with good tuning
Old 03-13-2010, 09:21 AM
  #6  
TECH Fanatic
iTrader: (23)
 
1989k1500's Avatar
 
Join Date: May 2006
Location: Ravenna, MI
Posts: 1,858
Likes: 0
Received 0 Likes on 0 Posts
Default

If you plan to break it I would start with that 150 and make a few passes to make sure the car doesnt do anything wild on you then bump it up to 200 or more.
Old 03-13-2010, 09:32 AM
  #7  
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
1slow01Z71's Avatar
 
Join Date: Oct 2004
Location: Austin, TX
Posts: 23,204
Likes: 0
Received 4 Likes on 4 Posts
Default

I know of a few poeple who have put a 250 shot on stock bottom end 6.0s but 5.3 I think only a 200 shot.
Old 03-13-2010, 09:38 AM
  #8  
TECH Addict
iTrader: (18)
 
outlawz2004's Avatar
 
Join Date: Sep 2007
Posts: 2,633
Likes: 0
Received 2 Likes on 2 Posts
Default

Give me the 5.3, then torture my 4.8.
Old 03-13-2010, 09:59 AM
  #9  
TECH Fanatic
iTrader: (3)
 
walledition's Avatar
 
Join Date: Mar 2009
Location: Chihuahua, Mexico
Posts: 1,500
Received 7 Likes on 6 Posts
Default

i run 150 shot on my setup all the time, if i only had bigger injectors and a better fuel pump then stock i would try 200 thats for sure...
Old 03-13-2010, 01:28 PM
  #10  
Registered User
Thread Starter
 
1sloC4's Avatar
 
Join Date: Feb 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you guys Think the hp estimate is pretty fair or am I underestimating this little guy?


Quick Reply: thoughts on torturing a 5.3?



All times are GMT -5. The time now is 10:49 AM.