Trick flow cams
#1
On The Tree
Thread Starter
Join Date: Feb 2010
Location: colorado
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Trick flow cams
I have done research on these cams from trick flow.
I have been looking all over the damn internet to find videos or even reviews
Anybody running one of these?
I am looking to install the trickflow 216/220 in a lq9
then having my 706 heads worked by AI for next winter
cam specs:216/220@.050 .560/.560 114
Im hoping that the 6.0 will have midrange power but still some low end torque
Its not the compcam 216/220
Anybody?
I have been looking all over the damn internet to find videos or even reviews
Anybody running one of these?
I am looking to install the trickflow 216/220 in a lq9
then having my 706 heads worked by AI for next winter
cam specs:216/220@.050 .560/.560 114
Im hoping that the 6.0 will have midrange power but still some low end torque
Its not the compcam 216/220
Anybody?
#2
MASS seller approved
iTrader: (19)
Join Date: Jan 2011
Location: Hampton bays, new york
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
If u want to take the geuss work out of picking a cam contact Pat G from guerra motorsports and for $25 he will spec u a cam tailored to exactly what ur looking for he will even point u in the right direction for the springs to match the cam. He really really knows cams so much so that he can have a successful business by doing it. I too have a lq9 and he speced a cam for me and I was very happy with the info I learned from him and the specs he gave
#3
On The Tree
Thread Starter
Join Date: Feb 2010
Location: colorado
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
im not looking for a spec cam just looking for any one running a trickflow cam
Has anyone ran a trickflow cam in a 6.0?
Ive seen the 5.3 trickflow head/cam setup in the dyno section
Has anyone ran a trickflow cam in a 6.0?
Ive seen the 5.3 trickflow head/cam setup in the dyno section
#4
On The Tree
Thread Starter
Join Date: Feb 2010
Location: colorado
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
ttt
nobody run these cams?
im expecting awesome midrange power
the 317 heads will be milled and im going to use a thinner
gasket to help my quench
im not looking for the 1/4 mile with it
but if im going 65mph i sure hope to pass somebody
any input would be great
to hear about
nobody run these cams?
im expecting awesome midrange power
the 317 heads will be milled and im going to use a thinner
gasket to help my quench
im not looking for the 1/4 mile with it
but if im going 65mph i sure hope to pass somebody
any input would be great
to hear about
#5
The trickflow 216/220 should be similar to the comp 216/220 I am assuming, but the trickflow one has more lift. IDK what kind of lobes trickflow uses.
You are correct that cam will be more of a torque cam since you are putting it in a 6.0.
You are correct that cam will be more of a torque cam since you are putting it in a 6.0.
#7
On The Tree
Thread Starter
Join Date: Feb 2010
Location: colorado
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
i appreciate the feedback guys
i too think i heard its a comp grind
i cant find anywhere what lobes trick flow uses
i wanted a cam with not too much lift (spring life)
this truck sees alot of the 2-5k rpm being on the highway
and the steep inclines
what tranny cooler are you guys running?
i know that my 4l60e wont last long
especially when i get that 278mm stall from chris at circle d
i too think i heard its a comp grind
i cant find anywhere what lobes trick flow uses
i wanted a cam with not too much lift (spring life)
this truck sees alot of the 2-5k rpm being on the highway
and the steep inclines
what tranny cooler are you guys running?
i know that my 4l60e wont last long
especially when i get that 278mm stall from chris at circle d
Trending Topics
#8
i appreciate the feedback guys
i too think i heard its a comp grind
i cant find anywhere what lobes trick flow uses
i wanted a cam with not too much lift (spring life)
this truck sees alot of the 2-5k rpm being on the highway
and the steep inclines
what tranny cooler are you guys running?
i know that my 4l60e wont last long
especially when i get that 278mm stall from chris at circle d
i too think i heard its a comp grind
i cant find anywhere what lobes trick flow uses
i wanted a cam with not too much lift (spring life)
this truck sees alot of the 2-5k rpm being on the highway
and the steep inclines
what tranny cooler are you guys running?
i know that my 4l60e wont last long
especially when i get that 278mm stall from chris at circle d
#10
On The Tree
Thread Starter
Join Date: Feb 2010
Location: colorado
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
im sure that chris will recomend somewhere around a 3k stall
so i am just trying to save every bit of the 4l60e i can
the trucool sounds pretty good but its a little more expensive
than what summit offers?
Anything bad with the summit coolers?
I figured i would give the transmission a fighting chance- lol
I do sometimes stay in the 3500-4000 rpm range for awhile
thanks for you guys input
so i am just trying to save every bit of the 4l60e i can
the trucool sounds pretty good but its a little more expensive
than what summit offers?
Anything bad with the summit coolers?
I figured i would give the transmission a fighting chance- lol
I do sometimes stay in the 3500-4000 rpm range for awhile
thanks for you guys input