Trick Flow GenX 255 square port heads
#12
On The Tree
I ended up pulling the trigger on these. Getting them through TEA. Had them mill for a 64cc chamber and they will be putting there final touches on them as well. Can't wait to see what they do.
#15
TECH Resident
iTrader: (2)
Join Date: Jul 2010
Location: Waverly, Ne
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
All Tea does is there priority valve job and that bumps flow about 6cfm as advertised as I remember, Mamo re shapes the chamber a little bit, so I'm told, to what I dunno. I'm sure it's worth it.
As for my experience my setup with 10*smaller intake/ex and cam made the same as my l92 headed 408 sorry it wasn't a very good comparison. Makes good torque early on but that could just be my combo.
As for my experience my setup with 10*smaller intake/ex and cam made the same as my l92 headed 408 sorry it wasn't a very good comparison. Makes good torque early on but that could just be my combo.
Thread
Thread Starter
Forum
Replies
Last Post
sauldgold
GM Engine & Exhaust Performance
3
07-23-2015 02:15 PM