vic jr. vs fast 90 on 408 w/ 150-200 shot
03-19-2007 | 12:14 AM
#1
Thread Starter
On The Tree
Joined: Dec 2006
Posts: 119
Likes: 0
From: Reside: Las Vegas Home: Ventura
vic jr. vs fast 90 on 408 w/ 150-200 shot
which would be the best choice to go with for a 408 with a 150-200 shot? i like the vic but with the higher power band im not sure how it would perform compared to the fast 90. the cam im going to run will match a 3000-3200 stall.
03-19-2007 | 10:21 AM
#2
According to Edelbrock, the power band rating for the vic jr is based on the CARB version. The efi version has power from 1800rpm up.
The UMI Spyder is a vic jr clone casting and it stacked up nicely against the FAST 90. If you go with the vic jr however you need to use a down draft adaptor from WCCH or make sure you get a good flowing elbow.
The UMI Spyder is a vic jr clone casting and it stacked up nicely against the FAST 90. If you go with the vic jr however you need to use a down draft adaptor from WCCH or make sure you get a good flowing elbow.
03-19-2007 | 12:36 PM
#3
Thread Starter
On The Tree
Joined: Dec 2006
Posts: 119
Likes: 0
From: Reside: Las Vegas Home: Ventura
is the super vic out yet? i'd like to know how well it performs with a taller deck and larger runners.
EDIT: just got an email from edelbrock
"At this it is still in the development/production stages and no date & price has been issued."
EDIT: just got an email from edelbrock
"At this it is still in the development/production stages and no date & price has been issued."
Last edited by WODY; 03-19-2007 at 12:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
