Why buy 2 sets of springs and swap'em twice, do it right the first time and go with the PAC's!

 

Yessiree....I believe that the closed seat pressure for the LS6 springs is like 90# vs 130# for PAC's or Comp's. Can't remember the open pressures though...maybe like 280 vs 3xx?

 

Cause LS6 springs cost about 1/8 of what the PAC's cost and will sell on Ebay with no problem when or if he decides to upgrade.
http://www.pacracing.com/Beehive_Spr...Set_of_16.html

These are the PAC's I went with in my race motor, but yellows are fine for the xr265.

 

He can use the PAC 1218's. and they are only about $120 from scoggin dickey. So LS6 springs are about 1/2 the cost.

http://www.pacracing.com/Beehive_Spr...Set_of_16.html

 

That's what I went with. Couldn't pass this up. Heck of a deal!!! Good for .600 lift!!!

 

That is a good deal, and as mentioned, it leaves you room to grow if you ever decide to put a bigger bumpstick in...