The LSX S10
10-10-2013, 07:38 AM
#93
On The Tree
Thread Starter
Join Date: Feb 2009
Location: Lexington, AL
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
]Been a while since I updated the thread but I've pulled off the helper leafs because they would touch the slide a links when I jacked up the rear and it was stiff as a board rode like a log wagon lol I also loosened off on the bars for some softness and maybe later on do some shock adjusting as well.
Heres also some pics of my finished console I got back yesterday from upholstery. I used a piece of aluminum from Lowes to cover my rough edges I cut and also hide the staples holding the boot in place . And then sanded and polished like hell to get it to shine and match my shifter ****. Excuse the dust on the console these pics were took late last while test fitting.
Heres also some pics of my finished console I got back yesterday from upholstery. I used a piece of aluminum from Lowes to cover my rough edges I cut and also hide the staples holding the boot in place . And then sanded and polished like hell to get it to shine and match my shifter ****. Excuse the dust on the console these pics were took late last while test fitting.
10-10-2013, 11:44 AM
#97
On The Tree
Thread Starter
Join Date: Feb 2009
Location: Lexington, AL
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
11-10-2013, 12:00 PM
#99
On The Tree
Thread Starter
Join Date: Feb 2009
Location: Lexington, AL
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Converter is in and man did this thing come a live! Also put on some eBay tubular upper control arms as well cause the motor mounts settled and the headers were touching the stock control arms. Pain in the *** to put on since I had to take the headers off but thanks god the tranny was out ta the way. Pics to come as well as a track day maybe next weekend weather permitting!
