"Project LS10"
#301
formerly 2000blackcamaross (6-25-2013)
Thread Starter
iTrader: (41)
Join Date: Nov 2006
Location: Drivers seat in Columbia, Mo
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
OK no video but I have a pic. or two. I got the idle tuned in and out of gear almost spot on. I started working on the 1/3 throttle pulls to 4,000 RPM and that is coming along really nice. I will say the 1->2 shift is hell on the rear tires even at 1/3 throttle.
I don't need this on the window anymore
Screen shot of tuning the idle
I don't need this on the window anymore
Screen shot of tuning the idle
#304
formerly 2000blackcamaross (6-25-2013)
Thread Starter
iTrader: (41)
Join Date: Nov 2006
Location: Drivers seat in Columbia, Mo
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys, it decided to rain today so I didn't get out to do more tuning or get a video of a burnout. I will get it out and keep tuning on it every time out so I can really beat on this thing. I do want to change the oil and filter on it just to make sure that there isn't anything in it such as metal shavings. I don't expect any but I have had a buddy find stuff in the oil on new motors that shouldn't be there. Better safe than sorry. I do know that I have some tuning things to work out but that SHOULD be small potatoes. I have found that tuning is fun and something that makes a project 100% mine. I will keep everyone posted, if anyone is reading this thread anymore. lol
#305
formerly 2000blackcamaross (6-25-2013)
Thread Starter
iTrader: (41)
Join Date: Nov 2006
Location: Drivers seat in Columbia, Mo
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Did more tuning on it today and I am getting closer. I took her WOT a few times and she likes it. I still have stock shift tables and only running about 17* timing WOT in the upper RPM's. The traction bars are really doing the job right now. I am on cheap street tires 275's and she hooks up really good. From a 20 roll I can flat foot it and it will just barely dig some and seems to really pull up on the front.
#308
formerly 2000blackcamaross (6-25-2013)
Thread Starter
iTrader: (41)
Join Date: Nov 2006
Location: Drivers seat in Columbia, Mo
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
It only has 20* timing at 4,000 and up. lol I was holding it about 3,000-3,500 which is 18* to 19*. It is still on a little girl tune right now.
It only has 20* timing at 4,000 and up. lol I was holding it about 3,000-3,500 which is 18* to 19*. It is still on a little girl tune right now.