My 1/16th Mini E-revo
05-10-2010, 11:50 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2009
Location: Douglassville, Texas
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
My 1/16th Mini E-revo
Well, my buddy bluechevypick got me BACK into this hobby, and now that he's out of it I have nobody to play with this bad boy with anymore, and my newly found tranny problems, I figure it might be time to shed of it...sadly.
Mine isn't quite as modded as his is, it has a few mods and a few added extras.
I'm going to replace the spoiler and the front body mount before i get rid of it, or I might just have the parts shipped to whoever buys it if anyone, as well as a new antenna, because my good friend decided to grab it...
It will definately need a new set of tires, as whoever buys it will find out, it's more than powerful enough to bald them.
My current mods to it are:
Rpm "Unbreakable plastic" a arms, front and rear
I have a mamba max esc that's mounted to seperate chassis, which would have to be swapped over, and it could use a good soldering job. The battery cables sometimes disconnect.
It has hot racing aluminum hubs on the front.
A performance center differential ( to keep it from popping wheelies AS much, but it still pops em)
With it also comes:
The stock a - arms.
2 Rhino 1550 mah 30c disharge lipos
A lipo charger ( can't remember the brand name, but i will post it tomorrow" )
all the connectors for the batteries
extra sets of trx connectors
extra steering assemblies
Steel Gears, to gear it up or down
the controller (of course)
and some more odd and end parts that i'll post as i go through them.
i'm looking for around 375 shipped, but i'm accepting offers, i'll also be posting pics of it in the next couple of days.
Mine isn't quite as modded as his is, it has a few mods and a few added extras.
I'm going to replace the spoiler and the front body mount before i get rid of it, or I might just have the parts shipped to whoever buys it if anyone, as well as a new antenna, because my good friend decided to grab it...
It will definately need a new set of tires, as whoever buys it will find out, it's more than powerful enough to bald them.
My current mods to it are:
Rpm "Unbreakable plastic" a arms, front and rear
I have a mamba max esc that's mounted to seperate chassis, which would have to be swapped over, and it could use a good soldering job. The battery cables sometimes disconnect.
It has hot racing aluminum hubs on the front.
A performance center differential ( to keep it from popping wheelies AS much, but it still pops em)
With it also comes:
The stock a - arms.
2 Rhino 1550 mah 30c disharge lipos
A lipo charger ( can't remember the brand name, but i will post it tomorrow" )
all the connectors for the batteries
extra sets of trx connectors
extra steering assemblies
Steel Gears, to gear it up or down
the controller (of course)
and some more odd and end parts that i'll post as i go through them.
i'm looking for around 375 shipped, but i'm accepting offers, i'll also be posting pics of it in the next couple of days.
Thread
Thread Starter
Forum
Replies
Last Post
slowlsx
GM Parts Classifieds
2
08-10-2015 05:33 PM
