DMH installed. Sound clips inside.
#1
TECH Addict
Thread Starter
iTrader: (13)
Join Date: Dec 2007
Location: Bako
Posts: 2,546
Likes: 0
Received 0 Likes
on
0 Posts
DMH installed. Sound clips inside.
Got my cutout on 2 days ago and got a couple idle/rev clips..
If you havent seen the new exhaust set up here is the link:
https://www.performancetrucks.net/fo...d.php?t=457259
Cold Start: about 30-40 secs in is when she starts to lope.
Warm start, Idle/Rev:
If you havent seen the new exhaust set up here is the link:
https://www.performancetrucks.net/fo...d.php?t=457259
Cold Start: about 30-40 secs in is when she starts to lope.
Warm start, Idle/Rev:
#7
TECH Addict
Thread Starter
iTrader: (13)
Join Date: Dec 2007
Location: Bako
Posts: 2,546
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. I knew someone was going to say something about my slippers..
Its pretty low for my liking too, Its about even with trans. crossmember. If I turn it the other way it hits the frame and wont line up with screws, Thats the best i could do. I have to get back under there to zip the wire in a couple spots so i will double check and see if I can get turned another way.
Its pretty low for my liking too, Its about even with trans. crossmember. If I turn it the other way it hits the frame and wont line up with screws, Thats the best i could do. I have to get back under there to zip the wire in a couple spots so i will double check and see if I can get turned another way.