JAVI05

what should i do next? i want painted handles. gotta find them though. thanks for looking.

ChevyTruck

iTrader: (39)

Clean truck

ZR1 DREAMING

iTrader: (28)

I like it! I think it would look great with a 2/3 drop, body color mirrors, and fully de-badged.

JAVI05

thanks. i wanna drop it so bad. but it has torsion bars. so it might cost a lil more.

ChevyTruck

iTrader: (39)

Lift it. check eBay for the door handels.

JakeBrakeIH

iTrader: (22)

you can take a few cranks off the t-bars and remove the 4x4 blocks from the rear, dropping it bout 2"s...quite a few members have done that here including myself

BIRCHZ71

iTrader: (4)

you would be surprised how much you can de-crank those torsion bars. check out mine...its a z71 with a drop shackle and de-cranked bars (with more to crank if i wanted) . Make sure to get an alignment!!

JAVI05

well i am thinking of doing it today. so i take out my blocks and de-crank my torsion bars. do i need the lowering shackles? or can i just remove the blocks and will i need shorter u- bolts?

ChevyTruck

iTrader: (39)

Make sure when you got to crank down the keys to jack the truck up on the frame or the front cross member, dont want to jack from the suspension at all.

Count the turns so that way it will sit level on both sides.

BIRCHZ71

iTrader: (4)

no you can use the factory u bolts.....you dont need shackles.....if you look at my truck you can tell the back sits about .5" lower in the back.....before the shackles it sat about level. Thats the great thing about torsion bars, you can play with it till you get it how you want it.