my truck (pics)
#12
TECH Fanatic
Thread Starter
Join Date: Jun 2008
Location: houston, tx
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
one more question. how do i take the blocks out? i am used to the leafs being under the rearend. i have put a jack on the frame of the back of truck as high as i can i began loosing the u-bolts. is this the right way i dont want the spring to pop if thats possible.
#15
TECH Fanatic
Thread Starter
Join Date: Jun 2008
Location: houston, tx
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
well its a no go.. i pulled the block out and tried to re use the u- bolts they are about 1/4" to long. to where i tighten them all the way and its still loose. so i put it all back.. where can i find the correct shorter u-blots. tried gayer-zone. and they "dont" carry them.
#16
TECH Regular
iTrader: (4)
Join Date: Nov 2008
Location: Austin
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
hmmm mine worked fine....go to the dealership and buy 2wd u bolts...those will fit perfect....
or you could do this. go buy lift block kit from oriely or autozone 20 or 30 bucks, and it will come with u bolts....they will be long but they should be threaded all the way up the bolt...then you could hack saw the rest of the bolt off.
or you could do this. go buy lift block kit from oriely or autozone 20 or 30 bucks, and it will come with u bolts....they will be long but they should be threaded all the way up the bolt...then you could hack saw the rest of the bolt off.
Thread
Thread Starter
Forum
Replies
Last Post