Finished Nano/Nitrous Rack
03-05-2009, 10:09 PM
#1
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Finished Nano/Nitrous Rack
We got the Nano/Nitrous Rack back from powdercoat and finished the installation.
We had the bottoms of the bottles done in Line-X to prevent chipping.
We sanded and then covered the aluminum panels in clear acrylic enamel.
The lines (-6 Nitrous and -8 Blow Off) have bulkhead fittings in the floor of the compartment. This is so we can pull the lines and cap the bulkhead fittings when not in use. Once the lines are pulled the compartment cover can be reinstalled.
We had the bottoms of the bottles done in Line-X to prevent chipping.
We sanded and then covered the aluminum panels in clear acrylic enamel.
The lines (-6 Nitrous and -8 Blow Off) have bulkhead fittings in the floor of the compartment. This is so we can pull the lines and cap the bulkhead fittings when not in use. Once the lines are pulled the compartment cover can be reinstalled.
03-06-2009, 08:14 PM
#4
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pictures of the Nitrous Solenoid/Relay Brackets. Everything mounts up behind the headlights for easy service. The Switch Panel will be mounted inside the center consol out of site. We need to finish up the lines, wiring and NOS Launcher with 3.5 LCD Touch Screen then off for some testing. The Purg blows out the brake cooling duct on the passenger side of the front bumper.
Before Powdercoat:
After Powdercoat:
Nitrous/Fuel Solenoid Bracket
Purg/Relay Bracket
Before Powdercoat:
After Powdercoat:
Nitrous/Fuel Solenoid Bracket
Purg/Relay Bracket
Last edited by leftcoast32; 03-07-2009 at 10:15 AM.
03-10-2009, 12:24 AM
#5
TECH Enthusiast
Join Date: Apr 2006
Location: Bako,CA
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
wow this work is amazing. As simple as it is, I never thought of making seperate brackets for my nitrous accessories. Great idea! got any more pictures of the interior, seats and harness setup?
Trending Topics
03-10-2009, 09:15 AM
#8
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the great comments!!
Thanks, here is a link to almost all of the build to date.
https://www.performancetrucks.net/fo...d.php?t=400482
https://www.performancetrucks.net/fo...d.php?t=400482
03-10-2009, 08:38 PM
#9
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
I still have alot of wiring to do but here are some progress pictures.
Nitrous Hi Flow Filter and 1/8 NPT Port for Nitrous Pressure Sending Unit
Relay Bracket with Purg Finished (Sprays out the Brake Duct on Passenger Side)
Nitrous and Fuel Solenoids (Lines Finished)
Nitrous Spray Bar Inlet with Lines Attached
Stand Alone Fuel System with Pressure Regulator and Fuel Pressure Gauge (1/8 NPT Port for Fuel Pressure Sending Unit)
Nitrous Hi Flow Filter and 1/8 NPT Port for Nitrous Pressure Sending Unit
Relay Bracket with Purg Finished (Sprays out the Brake Duct on Passenger Side)
Nitrous and Fuel Solenoids (Lines Finished)
Nitrous Spray Bar Inlet with Lines Attached
Stand Alone Fuel System with Pressure Regulator and Fuel Pressure Gauge (1/8 NPT Port for Fuel Pressure Sending Unit)
