Has anybody actually tapped into a Throttle Body Spacer?
#1
Has anybody actually tapped into a Throttle Body Spacer?
I have my nitrous kit, but I'm starting to like the idea of spraying through a plate. If I can get a hold of a throttle body spacer cheap I'll just tap it.
My question is: Has anyone actually done it before? I hear people talk about it all the time, but I've never actually seen people do it. obviously it would be a lot more simple than the Harris Speed kit or others that have drilled holes all the way around the plate.
Let me know how you did yours(if you did do it successfully). Thanks.
My question is: Has anyone actually done it before? I hear people talk about it all the time, but I've never actually seen people do it. obviously it would be a lot more simple than the Harris Speed kit or others that have drilled holes all the way around the plate.
Let me know how you did yours(if you did do it successfully). Thanks.
#5
TECH Apprentice
Join Date: Jan 2008
Location: Fresno, CA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
You could do it, but if your nozzle sprays at an angle, it might cause some puddling if theres any obstruction caused by the plate. You could grind away the plate, to fix that problem, though.
#6
TECH Senior Member
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
i wouldnt do it..i could see when just shootin straight down it will go across and hit the other side. i think a nozzle that shoots it in the intake manifold would be better than this..or an actuall nitrous plate that has hole all around to distribute it better
#7
11 Second Truck Club
iTrader: (5)
Join Date: Sep 2005
Location: Kansas
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
Don't listen to naysayers! I would do it but I can't see buying a plate when my system works now. I would do it how is it gonna hurt! just make sure it is spraying into the middle of the intake?