03 SS awd turbo street build
04-24-2018 | 10:53 PM
#173
P0102 is normal if the MAF is gone. P0103 should also be present if the MAF is failed correctly in the calibration for speed density.
P0106 is not normal, check wiring if you hadn't yet. Verify it's pinned right for whatever MAP you used.
Evap stuff can just be disabled if you removed those parts.
P1514 likely will require you to raise that table or max it out so it never happens, fairly common on boosted setups.
P0106 is not normal, check wiring if you hadn't yet. Verify it's pinned right for whatever MAP you used.
Evap stuff can just be disabled if you removed those parts.
P1514 likely will require you to raise that table or max it out so it never happens, fairly common on boosted setups.
04-24-2018 | 11:03 PM
#174
What he said. Check your logs for MAP activity that seems normal. That is definitely what caused your REP issue. The other codes are normal. You should be able to get all those readiness tests to pass by disabling codes.
04-25-2018 | 08:02 AM
#176
Thread Starter
Launching!
Joined: Sep 2013
Posts: 223
Likes: 11
From: San Diego
FFDP, Vortec, thanks for the info on the codes. Atomic is tuning the truck and fixed them. I have no clue when it comes to tuning and with HP tuners for that matter. Down the road I plan to spend the time on HPtuners forums and learn but for now I need this truck running.
Formula, thank you. I originally had 800+awhp in mind but I really have no idea what to expect. This is my first real LS build. I’m sure this thing is going to be fun on the street.
Formula, thank you. I originally had 800+awhp in mind but I really have no idea what to expect. This is my first real LS build. I’m sure this thing is going to be fun on the street.
04-25-2018 | 06:09 PM
#179
Thread Starter
Launching!
Joined: Sep 2013
Posts: 223
Likes: 11
From: San Diego
Thank you Badbrad.
Bud, that’s not a bad idea. In a week or two the truck is going to the paint shop for a respray of the bumper, grills, Hood, roof, 3 piecebed rail/spoiler and mirror caps. They are going to also cut and buff the side panels. Then it will be photo shoot worthy.
Bud, that’s not a bad idea. In a week or two the truck is going to the paint shop for a respray of the bumper, grills, Hood, roof, 3 piecebed rail/spoiler and mirror caps. They are going to also cut and buff the side panels. Then it will be photo shoot worthy.
