1963 Chevy C10 - 418ci LS swap
#11
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
418ci motor made 521rwhp through a locked up 80e. Not sure that I want to push a stock walbro 255 much passed that with a small bottle hit, let alone a 2 stage kit going between 300-400hp of n20.
Also, planing on going E85. I don't think the 2 walbros will even keep up with that.
Also, planing on going E85. I don't think the 2 walbros will even keep up with that.
#13
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Check out 67-72chevytrucks.com as there is a dedicated LS swap section for the older trucks. Don't let the year's on the web address fool you, the site is for all year Chevy trucks.
I am using a motor plate and was running 4th gen edelbrock 1 3/4 stepped to 1 7/8 headers. I just bought a set of Kook's 2" primary headers that will be better suited for the 418 and spray.
Here are some pics of the 4-link going together
I am using a motor plate and was running 4th gen edelbrock 1 3/4 stepped to 1 7/8 headers. I just bought a set of Kook's 2" primary headers that will be better suited for the 418 and spray.
Here are some pics of the 4-link going together
#16
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Little blury, but got the motor back together last night. Needed to swap the cam, put the heads/intake on. Still got to put the rockers down but that will wait till it's in and going to be firder.