1995 Chevy RCSB LQ4 Pt88mm Turbo Build
#21
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jul 2010
Location: Bossier City, Lousiana
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
Man I got all the under carriage painted black now I'm waiting on Kyle from kb to ship the turbo and misc parts! I will be making the stainless 4" down pipe as soon as I get it back along with finding the biggest air to air intercooler possible, I will keep ya posted on some pics! And yeah Scott I will get some pics of where the crossmember connects to the frame to justify some of this, thanks bro
Updated with ladder bar support pics!
Updated with ladder bar support pics!
Last edited by Swerve7rpm2000; 10-13-2010 at 06:05 PM.
#24
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jul 2010
Location: Bossier City, Lousiana
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
Updates...
Thanks man! Got some new pics of some work ive done lately, installed the intercooler and painted the whole undercarraige of the truck...oh and my pretty 92mm fast throttle body! Turbo and kb hot parts should be in tomorrow....
#28
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jul 2010
Location: Bossier City, Lousiana
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
Hey man thanks i got my 6.0 from a junkyard Pipes-U-Pull it here in shreveport louisiana..... check your local junk yards and they will have one come in sooner or later, i looked for about 2 months around here just kept checking the junk yards and finally got one, payed 1,200 for motor,trans, harness and had them pull it for me on a 110 degree day
#30
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jul 2010
Location: Bossier City, Lousiana
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
Few Updates!
Ok got my Turbo in from kb along with wg, bov, and crossover..... been slow this week due to waiting on parts coming in so i decided to try a lil polishing for the first time.... omg does this crap take forever or what! heres a few pics to update on parts and polishing! These are only wet sanded down to 240 grit then buffed, not good enough so i started with 1000 grit today and will rebuff when done but turned out well so far