2001 silverado rebuild
08-06-2012, 08:58 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2010
Location: Powell Mo
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
2001 silverado rebuild
I acquired this truck about a year and a half ago truck was in pretty rough shape when i started.
Tore it down and scored a donor cab from lkq
While the front clip was off went ahead and installed lt's pac springs and a comp 275hr cam and comp push rods
Tore it down and scored a donor cab from lkq
While the front clip was off went ahead and installed lt's pac springs and a comp 275hr cam and comp push rods
08-06-2012, 09:04 PM
#3
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2010
Location: Powell Mo
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Put the front clip on the truck and shaved the stake pocket holes on the bed and molded in a roll pan and started on the body work.
Then got the truck painted and started some reassembly
Then got the truck painted and started some reassembly
08-06-2012, 09:08 PM
#4
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2010
Location: Powell Mo
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Then put the bed on the truck and put the tahoe 20s i had for it on.
Aslo put 4.11s and a yukon lsd in the rear along with a new cover.
Some drilled and slotted rotors and ss brake lines.
ANd a 40k trans cooler
Aslo put 4.11s and a yukon lsd in the rear along with a new cover.
Some drilled and slotted rotors and ss brake lines.
ANd a 40k trans cooler
08-06-2012, 09:13 PM
#5
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2010
Location: Powell Mo
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Completely re dyed all of the interior plastics
Aslo re did the seats in katskinz leather
And hd front end all mocked up ready for paint.
Front end painted and assembled
Aslo re did the seats in katskinz leather
And hd front end all mocked up ready for paint.
Front end painted and assembled
08-06-2012, 09:17 PM
#6
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2010
Location: Powell Mo
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
And smoothed and painted the engine covers
Also put in a 3200 stall and transgo hd shift kit.
Still have to finish some interior work and have the truck tuned and dynoed and have the exhaust finished up, plans are to at the first of the year do a front mount turbo on the truck.
Also put in a 3200 stall and transgo hd shift kit.
Still have to finish some interior work and have the truck tuned and dynoed and have the exhaust finished up, plans are to at the first of the year do a front mount turbo on the truck.
08-06-2012, 09:22 PM
#7
Staging Lane
Join Date: Mar 2012
Location: Traverse City, Michigan
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Damn that is clean. Just goes to show it doesn't matter how bad it gets, it can always be brought back to life. I actually use that as an excuse, if it is all messed up then you can make it how YOU want it.
Anyways nice truck and don't crash it and make it look how it started again!!!!
Anyways nice truck and don't crash it and make it look how it started again!!!!
