224/224 lsa 113
#1
224/224 lsa 113
okay so i bought a lq9 6.0 with a cam 224/224 @.050 duration lsa 113 .555/.567
I want to see if anyone has ran this cam or has heard about them is it good to make power I'm gonna swap this lq9 in my clone ss single cab, for street/strip goals mid or low 12sec truck. i have seen the 224/224 lsa 112 .561 on both side, a ls1 maro with bolt on's an 3600 stall hit high 11sec.. just comparing cams
hope to get info..
wat stall should i run for my goals 3200 or 3600 i have 4:10 gears
I want to see if anyone has ran this cam or has heard about them is it good to make power I'm gonna swap this lq9 in my clone ss single cab, for street/strip goals mid or low 12sec truck. i have seen the 224/224 lsa 112 .561 on both side, a ls1 maro with bolt on's an 3600 stall hit high 11sec.. just comparing cams
hope to get info..
wat stall should i run for my goals 3200 or 3600 i have 4:10 gears
Last edited by cordova87; 10-16-2011 at 02:55 AM.
#6
TECH Fanatic
iTrader: (13)
Join Date: Apr 2010
Location: jennings,louisiana
Posts: 1,750
Likes: 0
Received 0 Likes
on
0 Posts
Circle-D 278mm 3200, 4:30's
Setup back then, with some dyno numbers & track time
,LQ4,221/226-566/562.114 CCM,Milled 243's,OBX Lt's,42#,E-FAN's,Eaton & 4:30's,FlowMaster,dual cutouts,Tru-Cool 40k,vette servo,Circle-D 3200,K&N CAI,Tuned by Wheatley
14.14@97mph-2.17 60FT,M/D 3rd locked 351/363 before heads & stall
ET 13.25@100-1.86 60ft,With 3:73's
New ET 12.94@103mph-1.74 60ft, With 4:30's,D/J 3rd locked 371/389
Setup back then, with some dyno numbers & track time
,LQ4,221/226-566/562.114 CCM,Milled 243's,OBX Lt's,42#,E-FAN's,Eaton & 4:30's,FlowMaster,dual cutouts,Tru-Cool 40k,vette servo,Circle-D 3200,K&N CAI,Tuned by Wheatley
14.14@97mph-2.17 60FT,M/D 3rd locked 351/363 before heads & stall
ET 13.25@100-1.86 60ft,With 3:73's
New ET 12.94@103mph-1.74 60ft, With 4:30's,D/J 3rd locked 371/389
#7
TECH Fanatic
iTrader: (6)
https://ls1tech.com/forums/parts-cla...200-stall.html
this si a perty banging deal since your truck is a bit heavyer then a camaro it will act a little looser so youll get a higher stall speed ..maybe like a 3500 or 3600
Last edited by 1slowz71; 10-16-2011 at 09:40 AM.
Trending Topics
#10
Tin Foil Hat Wearin' Fool
iTrader: (36)
honestly for your goals try to get nothing less the 228 duration cam and i think your lq9 will like a little more lift then that ..
Yank SS3200 stall - LS1TECH
this si a perty banging deal since your truck is a bit heavyer then a camaro it will act a little looser so youll get a higher stall speed ..maybe like a 3500 or 3600
Yank SS3200 stall - LS1TECH
this si a perty banging deal since your truck is a bit heavyer then a camaro it will act a little looser so youll get a higher stall speed ..maybe like a 3500 or 3600