370 build FINALLY getting started
#71
LOL, tell my wife that....
Shooting for .002
I might just throw a little bit of nitrous on the engine so I wanted it bigger. Plus my scr is right at 10:1 and I plan on towing so the piston to cylinder wall clearance is at the max of what wiseco says to run. I also gapped number 7 .001 bigger. lol
Shooting for .002
I might just throw a little bit of nitrous on the engine so I wanted it bigger. Plus my scr is right at 10:1 and I plan on towing so the piston to cylinder wall clearance is at the max of what wiseco says to run. I also gapped number 7 .001 bigger. lol
I actually run about .0023-.0025 on the rods and sometimes the mains. You have an iron block, it wont grow like aliminum. Run a better oil pump and now you can run thicker oil in it too to help with abuse. My motors held all this time like this. More room for error. And once you add nitrous, watch out, big time hit on the rod bearings.
Rick
#72
9 Second Truck Club
iTrader: (16)
LOL, tell my wife that....
Shooting for .002
I might just throw a little bit of nitrous on the engine so I wanted it bigger. Plus my scr is right at 10:1 and I plan on towing so the piston to cylinder wall clearance is at the max of what wiseco says to run. I also gapped number 7 .001 bigger. lol
Shooting for .002
I might just throw a little bit of nitrous on the engine so I wanted it bigger. Plus my scr is right at 10:1 and I plan on towing so the piston to cylinder wall clearance is at the max of what wiseco says to run. I also gapped number 7 .001 bigger. lol
#73
How do I change this text
Thread Starter
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
PCW is
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....
#74
I dont see how P2WC would be .
I am just asking because of the side coating you have on there and a few other things you might not have been through yet with these motors.
R
I am just asking because of the side coating you have on there and a few other things you might not have been through yet with these motors.
R
#75
9 Second Truck Club
iTrader: (16)
PCW is
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....
#77
TECH Apprentice
iTrader: (7)
Join Date: Jul 2006
Location: Reno,NV
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wilde racing
Good god, those pistons and rods look nice...
#78
TECH Veteran
PCW is
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....
I have a melling high volume pump for the engine..
I also upgraded the wrist pins to a tapper wall. Brian nutter from wiseco said they would be over kill for the hp I'm shooting for, even when/ if I spray it.
gapping rings
Good god, those pistons and rods look nice...
wraped up and wait for more free time....